Network Setting Items - Canon iR3245 Network Manual

Network Setting Items

If you are configuring the settings for the first time in "Interface Settings(p.2-10)," "TCP/IPv4 Settings(p.3-4),"
"TCP/IPv6 Settings(p.3-13)," or "Settings Common to TCP/IPv4 and TCP/IPv6(p.3-23)," use the control
panel of the machine. After configuring the TCP/IP settings, you can change them using the Remote UI.
In the NetWare or AppleTalk network, the TCP/IP protocol must be used to specify the settings with
software other than the control panel of the machine. The setting items are shown below.
Remark
Some items can be set using the Remote UI. Use the
control panel of the device to set items which cannot
be set using the Remote UI.
In the following tables, "N/A" stands for "Not
Applicable".
8
Change Settings/Display Connection Confirm.
Item
Change Settings/Display
Connection Confirm.
8-2 Network Setting Items
Default
Setting Description
Setting
On/Off Off
For more information on Device Information Delivery,
see the Reference Guide.
Can be set in
Remote UI
N/A
Device Information
Delivery