Tcp/Ip Network Setup Procedures - Canon iR3245 Network Manual

TCP/IP Network Setup Procedures

To use a TCP/IP network, it is necessary to perform the following procedures.
3
1 Protocol Settings (See " Protocol Settings (p.3-3) ." )
Specify the protocol settings. To specify the settings, use:
The machine's control panel
The Remote UI (via a web browser)
Canon utilities (NetSpot Device Installer, etc.)
2 Computer Settings for Printing/Sending a Fax (See " Setting Up a Computer
for Printing/Sending a Fax (p.3-79) .")
Specify the settings for each computer you use for printing or sending a fax. (Optional equipment is
required to print or send a fax from a computer. For the equipment needed, see "Optional Equipment
and System Requirements(p.1-2).")
3 Computer Settings for a File Server (See " Setting Up a Computer as a File
Server (p.3-96) .")
Specify the settings of the computer receiving data sent from the machine. (Optional equipment is
required to send data. For the equipment needed, see "Optional Equipment and System
Requirements(p.1-2).")
Remark
It is recommended that steps 1 and 3 above be
performed by the network administrator.
The machine or optional printing equipment does not
come with printer driver software that can be used on a
UNIX platform. (Use LPD to set up a printer in UNIX.)
3-2 TCP/IP Network Setup Procedures
As the fax option does not come with fax driver
software for the UNIX platform, it is not possible to
send a fax from a UNIX platform.