Canon iR3245 Network Manual page 243

Check the following:
Confirm that the settings for the addresses (<Use Stateless Address>, <Use Manual Address>, or
<Use DHCPv6>) are set to 'On'.
Remedy
If you are using a stateless address or DHCPv6, confirm that addresses can be obtained.
If addresses cannot be obtained, check the settings of the router or DHCPv6 server.
Cause 4
The IP address of the DNS server is not correct.
See "TCP/IPv4 Settings(p.3-4)," or "TCP/IPv6 Settings(p.3-13)," to
Remedy
check the IP address of the DNS server.
Sending could not be performed due to a lack of resources in the TCP/IP
Cause 5
protocol stack.
Remedy
Free up sufficient disk space on the WebDAV server.
<SSL Error> is displayed, and transmission fails when you try to send to a destination
using SSL encrypted communication via a WebDAV server.
Cause 1
The WebDAV server does not support SSL encrypted communication.
Specify the SSL settings required for your environment on the WebDAV
Remedy
server.
Cause 2
The proxy server does not support SSL encrypted communication.
If the WebDAV client is connected to the Internet via a proxy server, set
Remedy
the proxy server to use SSL.
<Could not be sent.> is displayed when you try to send via a WebDAV server.
Cause 1
An error occurred in the WebDAV server or proxy server.
Check the following:
Remedy
Check the settings of the WebDAV server.
Check the settings of the proxy server.
Cause 2
External access to the target files or directories was denied.
It may take several minutes for a stateless address to be determined.
Data Sending/File Sharing Problems and Remedies
7
7-15