Using Pconsole In The Queue Server Mode Or Remote Printer Mode In The Bindery Mode (Netware 3.2) - Canon iR3245 Network Manual

Using PCONSOLE in the Queue Server Mode or Remote Printer Mode in
the Bindery Mode (NetWare 3.2)
1. Log in to NetWare as Supervisor → start PCONSOLE.
2. If you have not set up a print server yet, set up the print server.
On the [Available Options] menu, select [Print Server Information] → press
[ENTER] on the keyboard.
Press [INSERT] on the keyboard.
Enter the name of the print server you are setting up → press [ENTER] on the
keyboard.
Be sure to remember the name of the print server. You need it to specify the printer's
protocol settings.
Press [ESC] on the keyboard to return to the [Available Options] menu.
3. Set up a Queue, and then assign the print server to the queue.
On the [Available Options] menu, select [Print Queue Information] → press
[ENTER] on the keyboard.
Press [INSERT] on the keyboard.
Enter the name of the queue you are setting up → press [ENTER] on the
keyboard.
Select the name of the queue you specified → press [ENTER] on the keyboard.
Using PCONSOLE in the Queue Server Mode or Remote Printer Mode in the Bindery Mode 4-9
(NetWare 3.2)
4