Network Connection Problems And Remedies - Canon iR3245 Network Manual

Network Connection Problems and Remedies

This section describes the causes of network connection problems, and how to resolve them.
Unable to Set up a Network
<Check the network connection.> is
displayed on the control panel.
The machine automatically connects to a
destination other than the intended
destination via its dial-up access (when a
dial-up router is connected to your
7 network).
Unable to Set up a Network
Cause
Remedy
<Check the network connection.> is displayed on the control panel.
Cause 1
Remedy
Cause 2
Remedy
The machine automatically connects to a destination other than the intended
7-2 Network Connection Problems and Remedies
[Change Settings/Display Connection Confirm.] is set to 'Off'.
Set [Change Settings/Display Connection Confirm.] to 'On'.
The machine and cable are not properly connected.
Turn OFF the machine's power switches, check that the machine is
connected to the network using the proper cable, and then turn them
ON. (See "Connecting the Machine to a Computer or Network(p.2-3).")
[Change Settings/Display Connection Confirm.] is set to 'On', although
the machine is not connected to a network.
Set [Change Settings/Display Connection Confirm.] to 'Off'.
Detailed information concerning the
machine cannot be set or browsed using
the Remote UI or utility.