Network Setting Items - Canon LBP6780x Manual

0978-085

Network Setting Items

You can change the network settings using various methods.
Network Setting Items
Software That Can Be Used for the Network Settings
Network Setting Items
The setting items you can change using NetSpot Device Installer, FTP Client, or the control panel on the printer are as
follows.
NOTE
The settings that you cannot specify using FTP Client, NetSpot Device Installer, or the control
panel on the printer
Specify them using a Web browser (Remote UI).
(However, you cannot specify the settings with
About the item names
In the following table, the characters shown in parentheses are exclusively for FTP Client.
For example, "[IP Address] (INT_ADDR)" is displayed differently as follows, depending on the application.
Web browser (Remote UI):
NetSpot Device Installer:
config file of FTP Client:
Control Panel:
General Settings
: Can be specified
Option
[Device Name]
(DEVICE_NAME)
[Location]
(SYS_LOC)
[System Manager]
(SYS_CONTACT)
[System Manager
Password]
(ROOT_PWD)
[Permit End-User's
Job Operation]
(USER_JOB_CONT)
Support Link
[URL]
(LINK_URL1)
even using the Remote UI.)
[IP Address]
[IP Address]
[INT_ADDR]
[IP Address]
: Cannot be specified
Contents
Up to 32 characters
Up to 32 characters
Up to 32 characters
Up to 16 characters
ON, OFF
Up to 128 alphanumeric
characters
Settings
Default NetSpot
Installer
LBP6780x
(Blank)
(Blank)
7654321
OFF
http://www.canon.com
Settings
Using Settings Using
Using
FTP
Device
Client
the Control
Panel