Network Setting Items; Network Setting Items Using The Operation Panel - Canon IMAGECLASS MF8180C Network Manual

Network Setting Items

Network Setting Items Using the Operation Panel

You can change the settings of the machine with the operation panel of the
machine. The setting items you can change are shown below.
■ NETWORK SETTINGS
Item
IP ADDRESS AUTO.
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
SNMP SETTINGS
LPD SETTINGS
USE HTTP
RAW SETTINGS
ETHERNET DRIVER
COMMUNITY NAME
1
COMMUNITY NAME
2
SNMP WRITABLE 1
SNMP WRITABLE 2
Setting Description
ON/OFF (DHCP/BOOTP/RARP, ON/OFF)
IP address
Subnet Mask
Default Gateway address
SNMP settings (ON/OFF), Port No. settings
LPD settings (ON/OFF), Port No. settings
HTTP settings (ON/OFF), Port No. settings
RAW settings (ON/OFF), Port No. settings
Ethernet driver settings (AUTO/MANUAL
(DUPLEX (HALF DUPLEX/FULL DUPLEX),
ETHERNET TYPE (10 BASE-T/100 BASE-
TX))
Community name settings
Community name settings
SNMP write settings (ON/OFF)
SNMP write settings (ON/OFF)
Default
Setting
ON
0.0.0.0
0.0.0.0
0.0.0.0
ON (Port No. 161)
ON (Port No. 515)
ON (Port No. 80)
ON
(Port No. 9100)
AUTO
public
(null)
ON
OFF
Network Setting Items
3
3-3