Windows 2000/Xp/Server 2003/Vista - Canon iR3245 Network Manual

Windows 2000/XP/Server 2003/Vista

In the following procedures, items displayed on the screens for Windows 2000 are used. The items
3
displayed may differ according to your operating system.
Remark
When using IPPS printing with Windows Vista, it is
necessary to obtain the public key of the machine and
install it in Windows Vista. For information on obtaining
the public key, see "Obtaining the Public Key of the
Machine to Use SSL with Windows Vista(p.8-33)."
1. Check the settings for <RX/Print Range> in [IP Address Range Settings] on
the IPv4 or IPv6 Settings screen to see whether the IP address of the
computer in which a driver is to be installed is permitted. For details, see step
8 in " TCP/IPv4 Settings (p.3-4) ," or step 6 in " TCP/IPv6 Settings (p.3-13) ."
If the settings for <RX/Print Range> in [IP Address Range Settings] on the IPv4 or IPv6 Settings screen do
not permit the IP address, you cannot install a driver.
If the IP address of the computer is beyond the range of the permitted addresses set for <RX/Print Range>
after installing a driver, you cannot print or send a fax from the computer.
2. Start the Add Printer Wizard → select a network printer.
3-90 Windows 2000/XP/Server 2003/Vista
If you are using Windows Vista, a dialog box may be
displayed while you are performing the procedure. In
this case, enter a user name and password. For more
information, see the manuals provided with the
operating system.