Canon iR3245 Network Manual page 241

File sharing settings for the NetWare file server are incorrect. (In Bindery
Cause 1
Mode.)
Check the following settings:
Use your computer to log in to the NetWare file server. From Windows Explorer, double-click
[Entire Network] → check that the NetWare server you want to share is listed there. You can also
check for the NetWare server as follows: On the [Start] menu, point to [Find] → click [Computer]
→ enter the name of the server you want to share → check that the server is on the network.
(This server name will be the [Host Name] you entered when you set up the recipient settings.)
Remedy
Open the server → open the folder for file sharing. (The path to this folder will be the [Folder Path]
you entered when you set up the recipient settings.)
Check that files can be written to this folder.
File sharing settings for the NetWare file server are incorrect. (In NDS
Cause 2
Mode.)
Check the following settings:
Log in as a user with Admin or equivalent authority. From Windows Explorer, double-click [Entire
Network] → check that the NetWare server you want to share is listed there. You can also check
for the NetWare server as follows: On the [Start] menu, point to [Find] → click [Computer] →
enter the name of the server you want to share → check that the server is on the network.
Start the NWADMIN for this server. If [Root] is displayed at the upper left corner of the screen, the
layer below it is the context. If [Root] is not displayed, go to the [View] menu → click [Go Up a
Remedy
Level] to change to the display below [Root]. (This context will be the value entered to the right
side of the expression "o=" when you set up [Host Name] of the recipient.)
With <Root> appearing on the screen, go to the [View] menu → click [Go Up a Level] to open the
[Set Context] dialog box. The tree name will be displayed in [Tree]. (This tree name will be the
value you entered to the right side of the expression ".TREE=" when youset up [Host Name] of the
recipient.)
There is a print job in the printing queue, and the machine is still
Cause 3
receiving this job.
Send the data after the print job has been completely received. The
Remedy
machine cannot send data while it is receiving a print job.
An error message is displayed on the touch panel display of the
Cause 4
machine.
After confirming the error message, perform the necessary operations
Remedy
according to the error message displayed.
If data cannot be sent or file sharing does not work after you do the above, consult your
network administrator.
If data cannot be sent or file sharing will not work after you do the above, consult your
network administrator.
Data Sending/File Sharing Problems and Remedies
7
7-13