2. On the Network Settings screen, press [Ethernet Driver Settings] →
specify the following.
If you want the machine to automatically determine the communication mode and Ethernet
●
type:
If you want to manually set the communication mode and Ethernet type for specifying a
●
particular Ethernet type setting:
If you want the machine to automatically determine the communication mode
and Ethernet type:
<Auto Detect>: [On]
If you reconnect the network cable (for example, reconnect the cable to a different Ethernet
hub) with the machine's main power switch ON, the Auto Detect function will not work even if
you set <Auto Detect> to [On]. Turn OFF the machine, wait at least 10 seconds, and then
turn it ON. (Connect the cable with the machine's main power switch OFF.)
The machine automatically determines the Ethernet type. Press [On] unless you want to specify a
particular Ethernet setting.
Interface Settings
2-11
2