Wps Station Screen; Scheduling Screen - ZyXEL Communications LTE3301 Series User Manual

7.9 WPS Sta tio n Sc re e n
Use this screen when you want to add a wireless station using WPS. To open this screen, click
Wire le ss L AN
Note: After you click
wireless station utility within 2 minutes. To add the second wireless station, you have to
press these buttons on both device and the wireless station again after the first 2
minutes.
Network > Wireless LAN > WPS Station
Fig ure 45
The following table describes the labels in this screen.
Table 29 Network > Wireless LAN > WPS Station
L ABEL
Push Button
Or input station's PIN
number
7.10 Sc he duling Sc re e n
Use this screen to set the times your wireless LAN is turned on and off. Wireless LAN scheduling is disabled
by default. The wireless LAN can be scheduled to turn on or off on certain days and at certain times. To
open this screen, click
Chapter 7 Wireless LAN
> tab.
WPS Sta tio n
on this screen, you have to press a similar button in the
Push Butto n
DESC RIPT IO N
Use this button when you use the PBC (Push Button Configuration) method to configure
wireless station's wireless settings.
Click this to start WPS-aware wireless station scanning and the wireless security information
synchronization.
Use this button when you use the PIN Configuration method to configure wireless station's
wireless settings.
Type the same PIN number generated in the wireless station's utility. Then click
associate to each other and perform the wireless security information synchronization.
>
Ne two rk Wire le ss L AN
LTE3301 Series User's Guide
> tab.
Sc he duling
77
>
Ne two rk
to
Sta rt