Summary: Wireless Station Status; Figure 14 Summary: Wireless Association List; Table 11 Summary: Packet Statistics - ZyXEL Communications p-334whd User Manual

P-334WHD User's Guide
The following table describes the labels in this screen.

Table 11 Summary: Packet Statistics

LABEL
Port
Status
TxPkts
RxPkts
Collisions
Tx B/s
Rx B/s
Up Time
System Up Time
Poll Interval(s)
Set Interval
Stop

2.4.8 Summary: Wireless Station Status

Click the WLAN Station Status (Details...) hyperlink in the Status screen. View the wireless
stations that are currently associated to the ZyXEL Device in the Association List screen.
This screen is not available when the ZyXEL Device is in WiFi WAN router mode.

Figure 14 Summary: Wireless Association List

50
DESCRIPTION
This is the ZyXEL Device's port type.
For the LAN ports, this displays the port speed and duplex setting or Down when
the line is disconnected.
For the WAN port, it displays the port speed and duplex setting if you're using
Ethernet encapsulation and Idle (line (ppp) idle), Dial (starting to trigger a call)
and Drop (dropping a call) if you're using PPPoE or PPTP encapsulation. This
field displays Down when the line is disconnected.
For the WLAN or WiFi WAN, it displays the connection type (54M or 11M) when
the WLAN or WiFi WAN is enabled and Down when the WLAN or WiFi WAN is
disabled.
For the WAN dial-up connection, it displays Idle when the modem dialup is
enabled but the line is not up, Up when the dial-up connection is up, Dial when
the ZyXEL Device is triggering a call or Down when the modem dialup is
disabled.
This is the number of transmitted packets on this port.
This is the number of received packets on this port.
This is the number of collisions on this port.
This displays the transmission speed in bytes per second on this port.
This displays the reception speed in bytes per second on this port.
This is the total amount of time the line has been up.
This is the total time the ZyXEL Device has been on.
Enter the time interval for refreshing statistics in this field.
Click this button to apply the new poll interval you entered in the Poll Interval(s)
field.
Click Stop to stop refreshing statistics, click Stop.
Chapter 2 Introducing the Web Configurator