Resetting The Prestige; Procedure To Use The Reset Button; Figure 6 Enter Password; Figure 7 Change Password - ZyXEL Communications VoIP Station Gateway P-2302R Series User Manual

P-2302R Series User's Guide

Figure 6 Enter Password

5 You should see a screen asking you to change your password (highly recommended) as
shown next. Type a new password (and retype it to confirm) and click Apply or click
Ignore.

Figure 7 Change Password

6 You should now see the web configurator MAIN MENU screen
Note: The Prestige automatically logs you out if the management session is idle for
five minutes. Simply log back in if this happens to you.

2.3 Resetting the Prestige

If you forget your password or cannot access the web configurator, you will need to reload the
factory-default configuration file or use the RESET button the back of the Prestige. Uploading
this configuration file replaces the current configuration file with the factory-default
configuration file. This means that you will lose all configurations that you had previously.
The password will also be reset to "1234".

2.3.1 Procedure To Use The Reset Button

Make sure the PWR/VoIP LED is on (not blinking) before you begin this procedure.
45
(Figure 8 on page
Chapter 2 Introducing the Web Configurator
47).