Introducing The Web Configurator; Web Configurator Overview; Accessing The Prestige Web Configurator; Figure 5 Web Site Address - ZyXEL Communications VoIP Station Gateway P-2302R Series User Manual

This chapter describes how to access the Prestige web configurator and provides an overview
of its screens.

2.1 Web Configurator Overview

The web configurator is an HTML-based management interface that allows easy Prestige
setup and management via Internet browser. Use Internet Explorer 6.0 and later or Netscape
Navigator 7.0 and later versions. The recommended screen resolution is 1024 by 768 pixels.
In order to use the web configurator you need to allow:
• Web browser pop-up windows from your device. Web pop-up blocking is enabled by
default in Windows XP SP (Service Pack) 2.
• JavaScripts (enabled by default).
• Java permissions (enabled by default).
See the troubleshooting chapter if you want to make sure these functions are allowed in
Internet Explorer or Netscape Navigator.

2.2 Accessing the Prestige Web Configurator

1 Make sure your Prestige hardware is properly connected and prepare your computer/
computer network to connect to the Prestige (refer to
2 Launch your web browser.
3 Type "192.168.1.1" (the Prestige's default LAN IP address) as the URL.

Figure 5 Web Site Address

4 Type "1234" (default) as the password and click Login. In some versions, the default
password appears automatically - if this is the case, click Login.
Chapter 2 Introducing the Web Configurator
C
Introducing the Web
P-2302R Series User's Guide
H A P T E R
Configurator
Appendix C on page
2
344).
44