Wizard Setup Complete - ZyXEL Communications VoIP Station Gateway P-2302R Series User Manual

P-2302R Series User's Guide
Table 7 Wizard 4: SIP 1 Setup
LABEL
Server Port
DTMF Mode
Country Code
Back
Finish

3.6 Wizard Setup Complete

After you click Finish, the Prestige attempts to connect to the Internet and register your SIP
account. The PWR/VoIP LED turns orange after the SIP account registration is successful.
You can also click the hyper link in this screen to view the status of the Prestige's WAN port
connection and SIP account registration.
59
DESCRIPTION
Enter the STUN or outbound proxy server's listening port for STUN or
outbound proxy requests in this field. Leave this field set to the default if
your VoIP service provider did not give you a server port number for STUN
or outbound proxy.
The Dual-Tone Multi-Frequency (DTMF) mode sets how the Prestige
handles the tones that your telephone makes when you push its buttons. It
is recommended that you use the same mode that your VoIP service
provider uses.
Select RFC 2833 to send the DTMF tones in RTP packets.
Select PCM (Pulse Code Modulation) to include the DTMF tones in the
voice data stream. This method works best when you are using a codec
that does not use compression (like G.711). Codecs that use compression
(like G.729) could distort the tones.
Select SIP INFO to send the DTMF tones in SIP messages.
Use the drop-down list box to select the country where your Prestige is
located. Do not use Default.
Click Back to return to the previous screen.
Click Finish to complete the wizard setup and save your configuration.
Chapter 3 Wizard Setup