Figure 87 Bandwidth Manager: Summary; Table 81 Bandwidth Manager: Summary - ZyXEL Communications VoIP Station Gateway P-2302R Series User Manual

Figure 87 Bandwidth Manager: Summary

The following table describes the labels in this screen.

Table 81 Bandwidth Manager: Summary

LABEL
LAN
WAN
Speed (kbps)
Scheduler
Maximize
Bandwidth
Usage
Apply
Reset
Chapter 19 Bandwidth Management
DESCRIPTION
These read-only labels represent the physical interfaces. Select an interface's check
box to enable bandwidth management on that interface. Bandwidth management
applies to all traffic flowing out of the router through the interface, regardless of the
traffic's source.
Traffic redirect or IP alias may cause LAN-to-LAN traffic to pass through the Prestige
and be managed by bandwidth management.
Enter the amount of bandwidth for this interface that you want to allocate using
bandwidth management.
This appears as the bandwidth budget of the interface's root class (see
19.11 on page 205). The recommendation is to set this speed to match what the
device connected to the port can handle. For example, set the WAN interface speed
to 1000 kbps if the broadband device connected to the WAN port has an upstream
speed of 1000 kbps.
Select either Priority-Based or Fairness-Based from the drop-down menu to
control the traffic flow.
Select Priority-Based to give preference to bandwidth classes with higher priorities.
Select Fairness-Based to treat all bandwidth classes equally. See
page 200.
Select this check box to have the Prestige divide up all of the interface's unallocated
and/or unused bandwidth among the bandwidth classes that require bandwidth. Do
not select this if you want to reserve bandwidth for traffic that does not match a
bandwidth class (see Section 19.8.1 on page
this interface (see the Speed field description).
Click Apply to save your changes back to the Prestige.
Click Reset to begin configuring this screen afresh.
P-2302R Series User's Guide
Section
Section 19.7 on
201) or you want to limit the speed of
204