Figure 18 Time Setting; Table 12 Time Setting - ZyXEL Communications VoIP Station Gateway P-2302R Series User Manual

P-2302R Series User's Guide

Figure 18 Time Setting

The following table describes the labels in this screen.

Table 12 Time Setting

LABEL
Time Protocol
Time Server
Address
Current Time
New Time
Current Date
69
DESCRIPTION
Select the time service protocol that your time server uses. Not all time servers
support all protocols, so you may have to check with your ISP/network
administrator or use trial and error to find a protocol that works.
The main difference between them is the format.
Daytime (RFC 867) format is day/month/year/time zone of the server.
Time (RFC 868) format displays a 4-byte integer giving the total number of
seconds since 1970/1/1 at 0:0:0.
The default, NTP (RFC 1305), is similar to Time (RFC 868).
Select None to enter the time and date manually.
Enter the IP address or URL of your time server. Check with your ISP or network
administrator if you are unsure of this information.
This field displays the Prestige's present time.
This field displays the last updated time from the time server.
When you select None in the Time Protocol field, enter the new time in this field
and then click Apply.
This field displays the Prestige's present date.
Chapter 4 System Screens