Snmp; Figure 64 Remote Management: Www; Table 46 Remote Management: Www - ZyXEL Communications VoIP Station Gateway P-2302R Series User Manual

Figure 64 Remote Management: WWW

The following table describes the labels in this screen.

Table 46 Remote Management: WWW

LABEL
Server Port
Server Access
Secured Client IP
Address
Apply
Reset

16.6 SNMP

Simple Network Management Protocol (SNMP) is a protocol used for exchanging
management information between network devices. SNMP is a member of the TCP/IP
protocol suite. Your Prestige supports SNMP agent functionality, which allows a manager
station to manage and monitor the Prestige through the network. The Prestige supports SNMP
version one (SNMPv1) and version two (SNMPv2). The next figure illustrates an SNMP
management operation. SNMP is only available if TCP/IP is configured.
Note: SNMP is only available if TCP/IP is configured.
Chapter 16 Remote Management Screens
DESCRIPTION
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Select the interface(s) through which a computer may access the Prestige using
this service.
A secured client is a "trusted" computer that is allowed to communicate with the
Prestige using this service.
Select All to allow any computer to access the Prestige using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the Prestige using this service.
Click Apply to save your customized settings and exit this screen.
Click Reset to begin configuring this screen afresh.
P-2302R Series User's Guide
162