Tcp/Ip Ethernet Setup And Dhcp; Figure 113 Menu 3.2 Tcp/Ip And Dhcp Ethernet Setup; Table 99 Dhcp Ethernet Setup Fields - ZyXEL Communications VoIP Station Gateway P-2302R Series User Manual

P-2302R Series User's Guide

24.2 TCP/IP Ethernet Setup and DHCP

Use menu 3.2 to configure your Prestige for TCP/IP.
To edit menu 3.2, enter 3 from the main menu to display Menu 3 — LAN Setup. When menu
3 appears, press 2 and press [ENTER] to display Menu 3.2 — TCP/IP and DHCP Ethernet
Setup, as shown next

Figure 113 Menu 3.2 TCP/IP and DHCP Ethernet Setup

DHCP= Server
Client IP Pool:
Starting Address= 192.168.1.33
Size of Client IP Pool= 32
First DNS Server= From ISP
IP Address= N/A
Second DNS Server= From ISP
IP Address= N/A
Third DNS Server= From ISP
IP Address= N/A
DHCP Server Address= N/A
Follow the instructions in the next table on how to configure the DHCP fields.

Table 99 DHCP Ethernet Setup Fields

FIELD
DHCP
Client IP Pools
Starting Address
Size of Client IP
Pool
237
:
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
This field enables/disables the DHCP server.
If set to Server, your Prestige will act as a DHCP server.
If set to None, the DHCP server will be disabled.
If set to Relay the Prestige acts as a surrogate DHCP server and relays requests
and responses between the remote server and the clients.
When set to Server, the following items need to be set:
This field specifies the first of the contiguous addresses in the IP address pool.
This field specifies the size, or count of the IP address pool.
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-1
Multicast= None
Edit IP Alias= No
Chapter 24 LAN Setup