Ordering Your Rules; Figure 130 Menu 15.1.1 First Set; Table 111 Menu 15.1.1 First Set - ZyXEL Communications VoIP Station Gateway P-2302R Series User Manual

Figure 130 Menu 15.1.1 First Set

Set Name= NAT_SET
Idx Local Start IP
--- --------------- -------------- --------------- ---------------
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Note: If the Set Name field is left blank, the entire set will be deleted.
Note: The Type, Local and Global Start/End IPs are configured in menu 15.1.1.1
(described later) and the values are displayed here

28.3.1.2 Ordering Your Rules

Ordering your rules is important because the Prestige applies the rules in the order that you
specify. When a rule matches the current packet, the Prestige takes the corresponding action
and the remaining rules are ignored. If there are any empty rules before your new configured
rule, your configured rule will be pushed up by that number of empty rules. For example, if
you have already configured rules 1 to 6 in your current set and now you configure rule
number 9. In the set summary screen, the new rule will be rule 7, not 9.
Now if you delete rule 4, rules 5 to 7 will be pushed up by 1 rule, so as old rule 5 becomes rule
4, old rule 6 becomes rule 5 and old rule 7 becomes rule 6.

Table 111 Menu 15.1.1 First Set

FIELD
Set Name
Chapter 28 Network Address Translation (NAT)
Menu 15.1.1 - Address Mapping Rules
Local End IP
Action= Edit
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Enter a name for this set of rules. This is a required field. If this field is left blank, the
entire set will be deleted.
P-2302R Series User's Guide
Global Start IP Global End IP
Select Rule=
Type
------
262