Chapter 2 Introducing The Web Configurator; Web Configurator Overview; Accessing The Prestige Web Configurator; Resetting The Prestige - ZyXEL Communications P-660H-61 User Manual

Introducing the Web Configurator
This chapter describes how to access and navigate the web configurator.
2.1

Web Configurator Overview

The embedded web configurator allows you to manage the Prestige from anywhere through a browser
such as Microsoft Internet Explorer or Netscape Navigator. Use Internet Explorer 6.0 and later or
Netscape Navigator 7.0 and later versions with JavaScript enabled. It is recommended that you set
your screen resolution to 1024 by 768 pixels
2.2

Accessing the Prestige Web Configurator

Make sure your Prestige hardware is properly connected (refer to the Compact Guide).
Step 1.
Prepare your computer/computer network to connect to the Prestige (refer to the Compact
Step 2.
Guide).
Launch your web browser.
Step 3.
Type "192.168.1.1" as the URL.
Step 4.
An Enter Network Password window displays. Enter the user name ("admin" is the
Step 5.
default), password ("1234" is the default) and click OK.
You should now see the SITE MAP screen.
Step 6.
The Prestige automatically times out after five minutes of
inactivity. Simply log back into the Prestige if this happens to you.
2.3

Resetting the Prestige

If you forget your password or cannot access the web configurator, you will need to use the RESET
button at the back of the Prestige to reload the factory-default configuration file. This means that you
will lose all configurations that you had previously and the password will be reset to "1234".
Introducing the Web Configurator

Figure 2-1 Password Screen

Prestige 660H Series User's Guide
Chapter 2
2-1