Edit Ip; Table 105 Fields In Menu 11.1 (Pppoe Encapsulation Specific) - ZyXEL Communications VoIP Station Gateway P-2302R Series User Manual

The following table describes the fields not already described in

Table 105 Fields in Menu 11.1 (PPPoE Encapsulation Specific)

FIELD
Service Name
Authen
Telco Option
Allocated Budget The field sets a ceiling for outgoing call time for this remote node. The default for
Period(hr)
Schedules
Nailed-Up
Connection
Session Options
Idle Timeout

26.3 Edit IP

Move the cursor to the Edit IP field in menu 11.1, then press [SPACE BAR] to select Yes.
Press [ENTER] to open Menu 11.3 - Remote Node Network Layer Options.
Chapter 26 Remote Node Configuration
DESCRIPTION
If you are using PPPoE encapsulation, then type the name of your PPPoE service
here. Only valid with PPPoE encapsulation.
This field sets the authentication protocol used for outgoing calls.
Options for this field are:
• CHAP/PAP - Your Prestige will accept either CHAP or PAP when requested by
this remote node.
• CHAP- accept CHAP only.
• PAP- accept PAP only.
this field is 0 meaning no budget control.
This field is the time period that the budget should be reset. For example, if we are
allowed to call this remote node for a maximum of 10 minutes every hour, then the
Allocated Budget is (10 minutes) and the Period(hr) is 1 (hour).
You can apply up to four schedule sets here.
This field specifies if you want to make the connection to this remote node a nailed-
up connection. More details are given earlier in this section.
Type the length of idle time (when there is no traffic from the Prestige to the remote
node) in seconds that can elapse before the Prestige automatically disconnects the
PPPoE connection. This option only applies when the Prestige initiates the call.
P-2302R Series User's Guide
Table 104 on page 247.
250