Static Route; Chapter 13 Static Route; Static Route Overview; Configuring Ip Static Route - ZyXEL Communications VoIP Station Gateway P-2302R Series User Manual

This chapter shows you how to configure static routes for your Prestige.

13.1 Static Route Overview

Each remote node specifies only the network to which the gateway is directly connected, and
the Prestige has no knowledge of the networks beyond. For instance, the Prestige knows about
network N2 in the following figure through remote node Router 1. However, the Prestige is
unable to route a packet to network N3 because it doesn't know that there is a route through the
same remote node Router 1 (via gateway Router 2). The static routes are for you to tell the
Prestige about the networks beyond the remote nodes.

Figure 54 Example of Static Routing Topology

13.2 Configuring IP Static Route

Click STATIC ROUTE to open the IP Static Route screen shown next.
Note: The first static route entry is the Prestige's default route and cannot be modified
or deleted.

Chapter 13 Static Route

P-2302R Series User's Guide
C
H A P T E R

Static Route

1 3
142