Configuring Class Setup; Figure 88 Bandwidth Manager: Class Setup; Table 82 Bandwidth Manager: Class Setup - ZyXEL Communications VoIP Station Gateway P-2302R Series User Manual

P-2302R Series User's Guide

19.11 Configuring Class Setup

The class setup screen displays the configured bandwidth classes by individual interface.
Select an interface and click the buttons to perform the actions described next. Click "+" to
expand the class tree or click "-" to collapse the class tree. Each interface has a permanent root
class. The bandwidth budget of the root class is equal to the speed you configured on the
interface (see
sub-classes for the root class. A default class automatically displays for all the bandwidth in
the Root Class that is not allocated to bandwidth classes.
To add or delete child classes on an interface, click BW MGMT, then the Class Setup tab.
The screen appears as shown (with example classes).

Figure 88 Bandwidth Manager: Class Setup

The following table describes the labels in this screen.

Table 82 Bandwidth Manager: Class Setup

LABEL
Class Setup
Interface
Add Sub-Class
Edit
Delete
Statistics
205
Section 19.10 on page 203
DESCRIPTION
Select an interface from the drop-down list box for which you wish to set up classes.
Bandwidth management controls outgoing traffic on an interface, not incoming. In
order to limit the download bandwidth of the LAN users, set the bandwidth
management class on the LAN. In order to limit the upload bandwidth, set the
bandwidth management class on the corresponding WAN interface.
Click Add Sub-class to add a sub-class.
Click Edit to configure the selected class. You cannot edit the root class.
Click Delete to delete the class and all its sub-classes. You cannot delete the root
class.
Click Statistics to display the status of the selected class.
to configure the speed of the interface). Configure
Chapter 19 Bandwidth Management