Figure 146 Menu 15.3 Trigger Port Setup; Table 113 Menu 15.3 Trigger Port Setup - ZyXEL Communications VoIP Station Gateway P-2302R Series User Manual

Enter 3 in menu 15 to display Menu 15.3 — Trigger Port Setup, shown next.

Figure 146 Menu 15.3 Trigger Port Setup

Rule
----------------------------------------------------------------------
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
The following table describes the fields in this screen.

Table 113 Menu 15.3 Trigger Port Setup

FIELD
Rule
Name
Incoming
Start Port
End Port
Trigger
Start Port
End Port
Press [ENTER] at the message "Press ENTER to Confirm..." to save your configuration, or press [ESC]
at any time to cancel.
Chapter 28 Network Address Translation (NAT)
Menu 15.3 - Trigger Port Setup
Name Start Port
Real Audio
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
This is the rule index number.
Enter a unique name for identification purposes. You may enter up to 15 characters in
this field. All characters are permitted - including spaces.
Incoming is a port (or a range of ports) that a server on the WAN uses when it sends
out a particular service. The Prestige forwards the traffic with this port (or range of
ports) to the client computer on the LAN that requested the service.
Enter a port number or the starting port number in a range of port numbers.
Enter a port number or the ending port number in a range of port numbers.
The trigger port is a port (or a range of ports) that causes (or triggers) the Prestige to
record the IP address of the LAN computer that sent the traffic to a server on the
WAN.
Enter a port number or the starting port number in a range of port numbers.
Enter a port number or the ending port number in a range of port numbers.
Incoming
End Port Start Port
6970 7170
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
P-2302R Series User's Guide
Trigger
End Port
7070 7070
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
272