Configuring A Static Route Entry; Figure 55 Ip Static Route; Table 39 Ip Static Route - ZyXEL Communications VoIP Station Gateway P-2302R Series User Manual

P-2302R Series User's Guide

Figure 55 IP Static Route

The following table describes the labels in this screen.

Table 39 IP Static Route

LABEL
#
Name
Active
Destination
Gateway
Edit
Delete

13.2.1 Configuring a Static Route Entry

Select a static route index number and click Edit. The screen shown next appears. Fill in the
required information for each static route.
143
DESCRIPTION
This is the number of an individual static route.
This is the name that describes or identifies this route.
This field shows whether this static route is active (Yes) or not (No).
This parameter specifies the IP network address of the final destination. Routing is
always based on network number.
This is the IP address of the gateway. The gateway is a router or switch on the same
network segment as the device's LAN or WAN port. The gateway helps forward
packets to their destinations.
Select the radio button next to a static route index number and then click Edit to set
up a static route on the Prestige.
Select the radio button next to a static route index number and then click Delete to
remove a static route on the Prestige.
Chapter 13 Static Route