Table 57 Access Control Logs - ZyXEL Communications VoIP Station Gateway P-2302R Series User Manual

Table 56 System Maintenance Logs (continued)
LOG MESSAGE
Successful WEB login
WEB login failed
TELNET Login Successfully
TELNET Login Fail
Successful FTP login
FTP login failed
NAT Session Table is Full!
Time initialized by Daytime
Server
Time initialized by Time
server
Time initialized by NTP
server
Connect to Daytime server
fail
Connect to Time server fail
Connect to NTP server fail
Too large ICMP packet has
been dropped
Configuration Change: PC =
0x%x, Task ID = 0x%x

Table 57 Access Control Logs

LOG MESSAGE
Firewall default policy: [ TCP |
UDP | IGMP | ESP | GRE | OSPF ]
<Packet Direction>
Firewall rule [NOT] match:[ TCP
| UDP | IGMP | ESP | GRE | OSPF ]
<Packet Direction>, <rule:%d>
Triangle route packet forwarded:
[ TCP | UDP | IGMP | ESP | GRE |
OSPF ]
Packet without a NAT table entry
blocked: [ TCP | UDP | IGMP | ESP
| GRE | OSPF ]
Router sent blocked web site
message: TCP
Chapter 18 Logs
DESCRIPTION
Someone has logged on to the device's web configurator
interface.
Someone has failed to log on to the device's web configurator
interface.
Someone has logged on to the router via telnet.
Someone has failed to log on to the router via telnet.
Someone has logged on to the device via ftp.
Someone has failed to log on to the device via ftp.
The maximum number of NAT session table entries has been
exceeded and the table is full.
The device got the time and date from the Daytime server.
The device got the time and date from the time server.
The device got the time and date from the NTP server.
The device was not able to connect to the Daytime server.
The device was not able to connect to the Time server.
The device was not able to connect to the NTP server.
The device dropped an ICMP packet that was too large.
The device is saving configuration changes.
DESCRIPTION
Attempted TCP/UDP/IGMP/ESP/GRE/OSPF access
matched the default policy and was blocked or forwarded
according to the default policy's setting.
Attempted TCP/UDP/IGMP/ESP/GRE/OSPF access
matched (or did not match) a configured firewall rule
(denoted by its number) and was blocked or forwarded
according to the rule.
The firewall allowed a triangle route session to pass
through.
The router blocked a packet that didn't have a
corresponding NAT table entry.
The router sent a message to notify a user that the router
blocked access to a web site that the user requested.
P-2302R Series User's Guide
186