Internet Access Configuration - ZyXEL Communications Prestige 100 User Manual

Remote access router
Hide thumbs Also See for Prestige 100:
Table of Contents

Advertisement

For this reason, it is recommended that you choose your network
number from the above list.
You can obtain your IP address from the IANA, from an ISP, or
assigned from a private network. If you belong to a small
organization and your Internet access is through an ISP, the ISP
can provide you with the Internet addresses for your local
networks. On the other hand, if you are part of a much larger
organization, you should consult your network administrator for the
appropriate IP addresses.
Once you have determined the IP address range for your local
network, you may want to use DHCP (Dynamic Host
Configuration Protocol) to assign addresses to individual hosts on
the network, as an alternative to manually configuring each host's
IP settings. See the TCP/IP Ethernet Setup and DHCP section on
page 35 for more information about DHCP.

Internet Access Configuration

The following steps describe the set-up procedure to configure
your Prestige for Internet access. The information you will need to
provide will be indicated in bold type.
Configuring for Internet Access 41

Advertisement

Table of Contents
loading

Table of Contents