Table 6-2 Remote Node Novell Ipx Options - ZyXEL Communications Prestige 641 User Manual

The table below describes the IPX-specific parameters of the remote node setup.
Field Description
Rem LAN In this field, enter the internal network number of the NetWare
Net # server on the remote LAN.
My WAN In this field, enter the network number of the WAN link. If you
Net #
leave this field as 00000000, your Prestige will determine
automatically the network number through negotiation with the
PPP peer.
Hop Count This field indicates the number of intermediate networks that must
be passed through to reach the remote node.
Tick Count This field indicates the time-ticks required to reach the remote
node.
Once you have completed filling in the Network Layer Options Menu, press [Enter] to return to
Menu 11.1. Then press [Enter] at the message [Press ENTER to Confirm] to save your
configuration, press [Esc] to cancel.
IPX Configuration
Prestige 641 ADSL Internet Access Router

Table 6-2 Remote Node Novell IPX Options

Option
00000000
(default)
1
(default)
2 (default)
6-7