Remote Node Filter; Figure 4-3 Menu 11.2 - Remote Node Ppp Options; Table 4-2 Remote Node Ppp Options Menu Fields - ZyXEL Communications Prestige 641 User Manual

Press Space Bar to Toggle.
The following table describes the Remote Node PPP Options Menu, and contains instructions on how to
configure the PPP options fields.
Field
Encapsulation
Compression
Once you have completed filling in Menu 11.2 – Remote Node PPP Options, press [Enter] at the
message [Press ENTER to Confirm...] to save your configuration, or press [Esc] at any time to
cancel.

4.1.5 Remote Node Filter

Use Menu 11.5 – Remote Node Filter to specify the filterset(s) to apply to the incoming and outgoing
traffic between this remote node and the Prestige. You can specify up to 4 filter sets separated by comma,
e.g., 1, 5, 9, 12, in each filter field. The default is no filters.
Note that spaces are accepted in this field. For more information on defining the filters, see Chapter 8 on
Filter Configuration.
Remote Node Configuration
Prestige 641 ADSL Internet Access Router
Menu 11.2 - Remote Node PPP Options
Encapsulation= Standard PPP
Compression= No
Press ENTER to CONFIRM or ESC to CANCEL:

Figure 4-3 Menu 11.2 - Remote Node PPP Options

Table 4-2 Remote Node PPP Options Menu Fields

Description
Select the CISCO PPP only when this remote node
is a Cisco machine; otherwise, select the Standard
PPP.
Turn on/off Stac Compression. The default for this
field is Off.
Option
Standard
PPP
CISCO
PPP
On/Off
(Default =
Off)
4-5