Prestige 641 ADSL Internet Access Router
2.6
Power On Your Prestige
At this point, you should have connected the console port, the ADSL line, the Ethernet port and the power
port to the appropriate devices or lines. You can now apply power to the Prestige by turning the switch on.
Initial Screen
Step 1.
When you power on your Prestige, it performs several internal tests as well as line initialization. After the
initialization, the Prestige asks you to press Enter to continue, as shown.
2-4
Wall
Y -CONNECTOR
Jack
Figure 2-4 Connecting the Microfilter
Prestige
Microfilter
Wall
Phone
Side
Side
Hardware Installation & Setup