Ipx Remote Node Setup; Figure 6-5 Menu 11.3 - Remote Node Novell Ipx Options - ZyXEL Communications Prestige 642 User Manual

Prestige 642 ADSL Internet Access Router

6.4.1 IPX Remote Node Setup

Follow the procedure in Chapter 5 to configure the protocol-independent parameters in Menu 11.1 -
Remote Node Profile. For the IPX-specific parameters in Menu 11.3 - Remote Node Network Layer
Options follow the instructions below.
Step 1. In Menu 11.1, make sure IPX is among the protocols in the Route field. (The Route field should
display Route = IPX or Route = IP + IPX.)
Step 2. Move the cursor to the Edit IP/IPX/Bridge field, then press the space bar to select Yes and
press [Enter] to open Menu 11.3 - Network Layer Options.
LLC-mux or PPP Encap :
VPI #= 1
VCI #= 1
IP Options:
Rem IP Addr:
Rem Subnet Mask= N/A
My WAN Addr= N/A
Single User Account= N/A
Metric= N/A
Private= N/A
RIP Direction= N/A
Version= N/A

Figure 6-5 Menu 11.3 - Remote Node Novell IPX Options

6-6
Menu 11.3 - Remote Node Network Layer Options
IPX Options:
Bridge Options:
Enter here to CONFIRM or ESC to CANCEL:
Rem LAN Net #= 00000000
My WAN Net #= 00000000
Hop Count= 1
Tick Count= 2
Ethernet Addr Timeout(min)= N/A
IPX Configuration