Table 4-1 Remote Node Profile Menu Fields - ZyXEL Communications Prestige 641 User Manual

Adsl internet access router
Table of Contents

Advertisement

Field
Rem Node Name
Active
Encapsulation=
Multiplexing=
Rem
Incoming:
Login
Name
Incoming:
Rem
Password
Outgoing:
My Login
Outgoing:
My
Password
Outgoing:
Authen
Remote Node Configuration
Prestige 641 ADSL Internet Access Router

Table 4-1 Remote Node Profile Menu Fields

Description
This is a required field [?]. Enter a descriptive name for the
remote node, for example, Corp. This field can be up to
eight characters. This name must be unique from any other
remote node name.
Press the spacebar to toggle between Yes and No. Inactive
nodes are displayed with a minus sign (-) at the beginning of
the name in Menu 11.
PPPoE refers to RFC 2516 and PPP refers to RFC 2364, "PPP
Encapsulation over ATM Adaption Layer 5". If RFC 1483
("Multiprotocol Encapsulation over ATM Adaption Layer 5") or
ENET ENCAP are selected, then the Rem Login, Rem Password,
My Login, My Password, Edit PPP Options and Authen fields
will not be applicable (N/A). Moreover, ENET ENCAP
encapsulation does not apply for IPX routing. If you choose ENET
ENCAP encapsulation, you must specify the Ethernet
encapsulation gateway in the Rem IP Addr field.
Press the spacebar to the select the multiplexing method.
Enter the login name that this remote node will use when it
calls your Prestige.
The login name in this field combined with the Rem Node
Password will be used to authenticate this node.
Enter the password used when this remote node calls your
Prestige.
Enter the login name for your Prestige when it calls this
remote node. If you are using PPPoE encapsulation, then
this field must be of the form
identifies your ISP.
Enter the password for your Prestige when it calls this
remote node.
This field sets the authentication protocol used for outgoing
calls.
Options for this field are:
l
CHAP/PAP - Your Prestige will accept either CHAP or
PAP when requested by this remote node.
l
CHAP - accept CHAP only.
l
PAP - accept PAP only.
user@domain
where domain
Options
Yes/No
PPP oE,
PPP,
RFC 1483
or ENET
ENCAP
VC-based
LLC-based
CHAP/PAP
CHAP
PAP
4-3

Advertisement

Table of Contents
loading

Table of Contents