Table of Contents
Advertisement
The following table describes the Bridge Static Route Menu.
Field
Description
Route Name
Enter a name for the bridge static route for identification purposes.
Active
Activate/deactivate the static route.
Ether Address
Enter the MAC address of the destination machine that you wish to
bridge the packets to.
IP Address
If available, enter the IP address of the destination machine that you
wish to bridge the packets to.
Gateway Node
Enter the number of the remote node that is the gateway of this static
route.
Once you have completed filling in this menu, press [Enter] at the message [Press
ENTER to Confirm...] to save your configuration, or press [Esc] to cancel.
Bridging Setup
Prestige 641 ADSL Internet Access Router
Table 7-3 Bridge Static Route Menu Fields
7-5
Advertisement
Table of Contents
Troubleshooting
