Figure 3-4 Internet Access Setup; Table 3-4 Internet Access Setup Menu Fields - ZyXEL Communications Prestige 641 User Manual

Menu 4 - Internet Access Setup
ISP's Name= aa
Encapsulation= ENET ENCAP
Multiplexing= LLC-based
VPI #= 10
VCI #= 10
My Login= N/A
My Password= N/A
Single User Account= No
J IP Address Assignment= Static
Press ENTER to confirm or ESC to cancel:
Field
ISP's Name
Encapsulation
Multiplexing
VPI #
VCI #
My Login
My Password
Single User Account
Internet Access
Prestige 641 ADSL Internet Access Router
IP Address= 192.168.1.100
IP Subnet Mask= 255.255.255.0
ENET ENCAP Gateway= N/A

Figure 3-4 Internet Access Setup

Table 3-4 Internet Access Setup Menu Fields

Enter the name of your Internet Service Provider, e.g.,
myISP. This information is for identification purposes only.
Press the spacebar to select the method of encapsulation
used by your ISP. You must have a static IP address (see
below) for PPPoE, PPP, or RFC 1483 encapsulation.
Press the [Space Bar] to select the method of multiplexing
used by your ISP - either VC-based or LLC-based.
Enter the Virtual Path Identifier (VPI) that the telephone
company gives you.
Enter the Virtual Channel Identifier (VCI) that the telephone
company gives you.
Enter the login name that your ISP gives you. If you are
using PPPoE encapsulation, then this field must be of the
form user@domain
Enter the password associated with the login name above.
Press the spacebar to enable or disable SUA. Please see
the following section for a more detailed discussion on the
Single User Account feature.
Description
where domain identifies your ISP.
Get this information
from the telephone
company. Get the
other information from
your ISP.
Options/E.G.
e.g., MyISP
PPPoE, PPP,
RFC 1483 or
ENET ENCAP.
VC-based
LLC-based
10
10
reds
***
Yes
No
3-9