Remote Node TCP/IP Configuration
A typical LAN-to-LAN application is to use your Prestige to connect a branch office to the headquarters, as
depicted in the following diagram.
5.1
LAN-to-LAN Application
For the branch office, you need to configure a remote node in order to dial out to the headquarters.
Additionally, you may also need to define static routes if some services reside beyond the immediate
remote LAN.
5.1.1 Editing TCP/IP Options
Follow the steps below to edit Menu 11.3 - Remote Node Network Layer Options shown next.
In Menu 11.1, move the cursor to the Edit IP/IPX/Bridge, then press the space bar to toggle and set the
value to Yes. Press [Enter] to open Menu 11.3 - Network Layer Options.
Remote Node TCP/IP Configuration
Prestige 641 ADSL Internet Access Router
Figure 5-1 TCP/IP LAN-to-LAN Application
This chapter shows you how to configure
the TCP/IP parameters of a remote node.
Chapter 5
5-1