Remote Management And Nat; System Timeout; Telnet; Ftp - ZyXEL Communications ADSL2+ Ethernet/USB Gateway 660RU-Tx Series User Manual

Prestige 660RU-Tx Series User's Guide

10.1.2 Remote Management and NAT

When NAT is enabled:
• Use the Prestige's WAN IP address when configuring from the WAN.
• Use the Prestige's LAN IP address when configuring from the LAN.

10.1.3 System Timeout

There is a default system management idle timeout of five minutes (three hundred seconds).
The Prestige automatically logs you out if the management session remains idle for longer
than this timeout period. The management session does not time out when a statistics screen is
polling.

10.2 Telnet

You can configure your Prestige for remote Telnet access as shown next.

Figure 32 Telnet Configuration on a TCP/IP Network

10.3 FTP

You can upload and download Prestige firmware and configuration files using FTP. To use
this feature, your computer must have an FTP client.

10.4 Web

You can use the Prestige's embedded web configurator for configuration and file
management. See the online help for details.

10.5 Configuring Remote Management

Click Remote Management to open the following screen.
91 Chapter 10 Remote Management Configuration