Table of Contents
Advertisement
Figure 107 Menu 15.2.1 Specifying an Inside Server
---------------------------------------------------
21.5.3 Example 3: Multiple Public IP Addresses With Inside Servers
In this example, there are 3 IGAs from our ISP. There are many departments but two have
their own FTP server. All departments share the same router. The example will reserve one
IGA for each department with an FTP server and all departments use the other IGA. Map the
FTP servers to the first two IGAs and the other LAN traffic to the remaining IGA. Map the
third IGA to an inside web server and mail server. Four rules need to be configured, two bi-
directional and two unidirectional as follows.
1 Map the first IGA to the first inside FTP server for FTP traffic in both directions (1 : 1
mapping, giving both local and global IP addresses).
2 Map the second IGA to our second inside FTP server for FTP traffic in both directions (1
: 1 mapping, giving both local and global IP addresses).
3 Map the other outgoing LAN traffic to IGA3 (Many : 1 mapping).
4 You also map your third IGA to the web server and mail server on the LAN. Type
Server allows you to specify multiple servers, of different types, to other computers
behind NAT on the LAN.
The example situation looks somewhat like this:
Chapter 21 Network Address Translation (NAT)
Menu 15.2.1 - NAT Server Setup (Used for SUA Only)
Rule
Start Port No.
1.
Default
2.
0
3.
0
4.
0
5.
0
6.
0
7.
0
8.
0
9.
0
10.
0
11.
0
12.
0
Press ENTER to Confirm or ESC to Cancel:
Prestige 660RU-Tx Series User's Guide
End Port No.
IP Address
Default
192.168.1.10
0
0.0.0.0
0
0.0.0.0
0
0.0.0.0
0
0.0.0.0
0
0.0.0.0
0
0.0.0.0
0
0.0.0.0
0
0.0.0.0
0
0.0.0.0
0
0.0.0.0
0
0.0.0.0
172
Advertisement
Table of Contents
Troubleshooting
