ZyXEL Communications ADSL2+ Ethernet/USB Gateway 660RU-Tx Series User Manual page 73

Table 13 WAN Backup (continued)
LABEL
Traffic Redirect
Active
Metric
Backup Gateway
Back
Apply
Cancel
Chapter 6 WAN Setup
DESCRIPTION
Select this check box to have the Prestige use traffic redirect if the normal WAN
connection goes down.
Note: If you activate traffic redirect, you must configure at least one
Check WAN IP Address.
This field sets this route's priority among the routes the Prestige uses.
The metric represents the "cost of transmission". A router determines the best route
for transmission by choosing a path with the lowest "cost". RIP routing uses hop
count as the measurement of cost, with a minimum of "1" for directly connected
networks. The number must be between "1" and "15"; a number greater than "15"
means the link is down. The smaller the number, the lower the "cost".
Type the IP address of your backup gateway in dotted decimal notation. The
Prestige automatically forwards traffic to this IP address if the Prestige's Internet
connection terminates.
Click Back to return to the previous screen.
Click Apply to save the changes.
Click Cancel to begin configuring this screen afresh.
Prestige 660RU-Tx Series User's Guide
72