Figure 62 Menu 1.1 Configure Dynamic Dns; Table 36 Menu 1.1 Configure Dynamic Dns - ZyXEL Communications ADSL2+ Ethernet/USB Gateway 660RU-Tx Series User Manual

To configure dynamic DNS, go to Menu 1 — General Setup and select Yes in the Edit
Dynamic DNS field. Press [ENTER] to display Menu 1.1— Configure Dynamic DNS as
shown next.

Figure 62 Menu 1.1 Configure Dynamic DNS

Follow the instructions in the next table to configure dynamic DNS parameters.

Table 36 Menu 1.1 Configure Dynamic DNS

FIELD
Service Provider This is the name of your dynamic DNS service provider.
Active
Host
EMAIL
User
Password
Enable Wildcard Your Prestige supports DYNDNS Wildcard. Press [SPACE BAR] and then [ENTER]
When you have completed this menu, press [ENTER] at the prompt "
or ESC to Cancel:
Chapter 14 Menu 1 General Setup
Menu 1.1 - Configure Dynamic DNS
Service Provider= WWW.DynDNS.ORG
Active= Yes
Host= me.dyndns.org
EMAIL= mail@mailserver
USER= username
Password= ********
Enable Wildcard= No
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Press [SPACE BAR] to select Yes and then press [ENTER] to make dynamic DNS
active.
Enter the domain name assigned to your Prestige by your dynamic DNS provider.
Enter your e-mail address.
Enter your user name.
Enter the password assigned to you.
to select Yes or No This field is N/A when you choose DDNS client as your service
provider.
" to save your configuration, or press [ESC] at any time to cancel.
Prestige 660RU-Tx Series User's Guide
Press ENTER to Confirm
126