Syslog And Accounting; Figure 138 Sample Error And Information Messages; Figure 139 Menu 24.3.2 System Maintenance: Syslog And Accounting; Table 63 Menu 24.3.2 System Maintenance : Syslog And Accounting - ZyXEL Communications ADSL2+ Ethernet/USB Gateway 660RU-Tx Series User Manual

Prestige 660RU-Tx Series User's Guide

Figure 138 Sample Error and Information Messages

52 Sat Jan 01 00:00:00 2000 PP12
53 Sat Jan 01 00:00:00 2000 PP00
54 Sat Jan 01 00:00:00 2000 PP00 -WARN
55 Sat Jan 01 00:00:00 2000 PP00
56 Sat Jan 01 00:00:00 2000 PP00
57 Sat Jan 01 00:00:00 2000 PP1c
58 Sat Jan 01 00:00:00 2000 PP0a
59 Sat Jan 01 00:00:02 2000 PP09 -WARN
60 Sat Jan 01 00:00:05 2000 PP1b
61 Sat Jan 01 00:01:36 2000 PP14
62 Sat Jan 01 00:01:36 2000 PP00
63 Sat Jan 01 00:03:59 2000 PP00
Clear Error Log (y/n):

24.4.2 Syslog and Accounting

The Prestige uses the syslog facility to log the CDR (Call Detail Record) and system messages
to a syslog server. Syslog and accounting can be configured in Menu 24.3.2 — System
Maintenance — UNIX Syslog, as shown next.

Figure 139 Menu 24.3.2 System Maintenance: Syslog and Accounting

You need to configure the UNIX syslog parameters described in the following table to activate
syslog then choose what you want to log.

Table 63 Menu 24.3.2 System Maintenance : Syslog and Accounting

PARAMETER
UNIX Syslog:
Active
Syslog IP Address
Log Facility
201
Menu 24.3.2 - System Maintenance - UNIX Syslog
UNIX Syslog:
Active= No
Syslog IP Address= ?
Log Facility= Local 1
Types:
CDR= No
Packet Triggered= No
Filter Log= No
PPP Log= No
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Use [SPACE BAR] and then [ENTER] to turn syslog on or off.
Type the IP address of your syslog server.
Use [SPACE BAR] and then [ENTER] to select one of seven different local
options. The log facility lets you log the message in different server files. Refer to
your UNIX manual.
INFO LAN promiscuous mode <1>
INFO Last errorlog repeat 1 Times
SNMP TRAP 0: cold start
INFO main: init completed
INFO Starting Connectivity Monitor
INFO monitoring WAN connectivity
WARN MPOA Link Down
SNMP TRAP 3: link up
INFO adjtime task pause 1 day
INFO SMT Password pass
INFO SMT Session Begin
WARN M1Save:Iface not found for DDNS
Chapter 24 System Information and Diagnosis