User-Defined Address Mapping Sets; Figure 99 Menu 15.1.1 First Set - ZyXEL Communications ADSL2+ Ethernet/USB Gateway 660RU-Tx Series User Manual

Table 50 SUA Address Mapping Rules (continued)
FIELD
Local End IP
Global Start IP
Global End IP
Type
When you have completed this menu, press [ENTER] at the prompt "
or ESC to Cancel:

21.3.1.2 User-Defined Address Mapping Sets

Now let's look at option 1 in menu 15.1. Enter 1 to bring up this menu. We'll just look at the
differences from the previous menu. Note the extra Action and Select Rule fields mean you
can configure rules in this screen. Note also that the [?] in the Set Name field means that this
is a required field and you must enter a name for the set.

Figure 99 Menu 15.1.1 First Set

Set Name= ACL Default Set
Idx Local Start IP
--- ---------------
1.
2
3.
4.
5.
6.
7.
8.
9.
10.
Chapter 21 Network Address Translation (NAT)
DESCRIPTION
Local End IP is the ending local IP address (ILA). If the rule is for all local IPs, then
the Start IP is 0.0.0.0 and the End IP is 255.255.255.255.
This is the starting global IP address (IGA). If you have a dynamic IP, enter 0.0.0.0 as
the Global Start IP.
This is the ending global IP address (IGA).
These are the mapping types. Server allows us to specify multiple servers of
different types behind NAT to this machine. See later for some examples.
" to save your configuration, or press [ESC] at any time to cancel.
Menu 15.1.1 - Address Mapping Rules
Local End IP
---------------
Action= Edit
Press ENTER to Confirm or ESC to Cancel:
Note: If the Set Name field is left blank, the entire set will be
deleted.
Note: The Type, Local and Global Start/End IPs are
configured in menu 15.1.1.1 (described later) and the values are
displayed here.
Prestige 660RU-Tx Series User's Guide
Press ENTER to Confirm
Global Start IP Global End IP
--------------- -------------
Select Rule=
Type
----
166