Ftp File Upload Command From The Dos Prompt Example; Figure 147 Telnet Into Menu 24.7.2 System Maintenance - ZyXEL Communications ADSL2+ Ethernet/USB Gateway 660RU-Tx Series User Manual

Figure 147 Telnet Into Menu 24.7.2 System Maintenance

Menu 24.7.2 - System Maintenance - Upload System Configuration File
To upload the system configuration file, follow the procedure below:
1. Launch the FTP client on your workstation.
2. Type "open" and the IP address of your system. Then type "root" and
SMT password as requested.
3. Type "put configuration filename rom-0" where "configurationfilename"
is the name of your system configuration file on your workstation, which
will be transferred to the "rom-0" file on the system.
4. The system reboots automatically after the upload system configuration
file process is complete.
For details on FTP commands, please consult the documentation of your FTP
client program. For details on uploading system firmware using TFTP (note
that you must remain on this menu to upload system firmware using TFTP),
please see your manual.
To upload the firmware and the configuration file, follow these examples

25.4.3 FTP File Upload Command from the DOS Prompt Example

1 Launch the FTP client on your computer.
2 Enter "
3 Press [ENTER] when prompted for a username.
4 Enter your password as requested (the default is "1234").
5 Enter "
6 Use "
put
firmware.bin ras
Prestige and renames it "
configuration file on your computer (config.rom) to the Prestige and renames it "
Likewise "
your computer and renames it "
information on filename conventions.
7 Enter "
Chapter 25 Firmware and Configuration File Maintenance
Press ENTER to Exit:
", followed by a space and the IP address of your Prestige.
open
" to set transfer mode to binary.
bin
" to transfer files from the computer to the Prestige, for example, "
" transfers the firmware on your computer (firmware.bin) to the
". Similarly, "
ras
get rom-0 config.rom
" to exit the ftp prompt.
quit
Note: The Prestige automatically restarts after a successful file
upload.
Prestige 660RU-Tx Series User's Guide
put config.rom rom-0
" transfers the configuration file on the Prestige to
." See earlier in this chapter for more
config.rom
put
" transfers the
".
rom-0
214