Figure 12 Internet Access Wizard Setup: Lan Configuration; Table 9 Internet Access Wizard Setup: Lan Configuration - ZyXEL Communications ADSL2+ Ethernet/USB Gateway 660RU-Tx Series User Manual

Figure 12 Internet Access Wizard Setup: LAN Configuration

The following table describes the labels in this screen.

Table 9 Internet Access Wizard Setup: LAN Configuration

LABEL
LAN IP Address
LAN Subnet Mask
DHCP
DHCP Server
Client IP Pool Starting
Address
Size of Client IP Pool
Primary DNS Server
Secondary DNS Server As above.
Back
Finish
Chapter 3 Wizard Setup
DESCRIPTION
Enter the IP address of your Prestige in dotted decimal notation, for example,
192.168.1.1 (factory default).
Note: If you changed the Prestige's LAN IP address, you must
use the new IP address if you want to access the web
configurator again.
Enter a subnet mask in dotted decimal notation.
From the DHCP Server drop-down list box, select On to allow your Prestige to
assign IP addresses, an IP default gateway and DNS servers to computer
systems that support the DHCP client. Select Off to disable DHCP server.
When DHCP server is used, set the following items:
This field specifies the first of the contiguous addresses in the IP address
pool.
This field specifies the size or count of the IP address pool.
Enter the IP addresses of the DNS servers. The DNS servers are passed to
the DHCP clients along with the IP address and the subnet mask.
Click Back to go back to the previous screen.
Click Finish to save the settings and proceed to the next wizard screen.
Prestige 660RU-Tx Series User's Guide
52