Remote Management Configuration; Remote Management Overview; Remote Management Limitations - ZyXEL Communications ADSL2+ Ethernet/USB Gateway 660RU-Tx Series User Manual

This chapter provides information on configuring remote management.

10.1 Remote Management Overview

Remote management allows you to determine which services/protocols can access which
Prestige interface (if any) from which computers.
You may manage your Prestige from a remote location via:
• Internet (WAN only)
• ALL (LAN and WAN)
• LAN only,
• Neither (Disable).
To disable remote management of a service, select Disable in the corresponding Server
Access field.
You may only have one remote management session running at a time. The Prestige
automatically disconnects a remote management session of lower priority when another
remote management session of higher priority starts. The priorities for the different types of
remote management sessions are as follows.
1 Telnet
2 HTTP

10.1.1 Remote Management Limitations

Remote management over LAN or WAN will not work when:
• A filter in SMT menu 3.1 (LAN) or in menu 11.5 (WAN) is applied to block a Telnet,
FTP or Web service.
• You have disabled that service in one of the remote management screens.
• The IP address in the Secured Client IP field does not match the client IP address. If it
does not match, the Prestige will disconnect the session immediately.
• There is already another remote management session with an equal or higher priority
running. You may only have one remote management session running at one time.
Chapter 10 Remote Management Configuration
C
H A P T E R
Remote Management
Prestige 660RU-Tx Series User's Guide
Configuration
1 0
90