Firmware Upgrade; Chapter 10 Firmware Upgrade; Firmware Upgrade Overview; The Firmware Screen - ZyXEL Communications FMG Series User Manual

10.1 Firmware Upgrade Overview

This screen lets you upload new firmware to your FMG. You can download new firmware releases from
your nearest Zyxel FTP site (or www.zyxel.com) to upgrade your device's performance.
Only use firmware for your device's specific model. Refer to the device
label of your FMG.

10.2 The Firmware Screen

Click Maintenance > Firmware Upgrade to open the following screen. Download the latest firmware file
from the Zyxel website and upload it to your FMG using this screen. The upload process uses HTTP
(Hypertext Transfer Protocol) and may take up to two minutes. After a successful upload, the FMG will
reboot.
Do NOT turn off the FMG while firmware upload is in progress!
Figure 25 Maintenance > Firmware Upgrade
The following table describes the labels in this screen. After you see the firmware updating screen, wait
two minutes before logging into the FMG again.
Table 20 Maintenance > Firmware Upgrade
LABEL
Choose File
Upgrade
Reset

Firmware Upgrade

DESCRIPTION
Click this to find the .bin file you want to upload. Remember that you must decompress
compressed (.zip) files before you can upload them.
Click this to begin the upload process. This process may take up to two minutes.
Click this to clear the selected file.
FMG Series User's Guide
C
H A P T E R
42
10