Table of Contents
Advertisement
Security System
User Guide
Turn the System Part On (Part On or Cmd 2)
Exit Delay Time (to be filled in by your security company).
You have __________ sec. to exit premises before system turns on.
I can perform this command.
I cannot perform this command.
Part On turns on only part of your system, leaving the rest of the system turned off.
If your command center shows OK for Part On or OK for All On, this means all of the points that turn on for
Part On operation are normal (such as all protected doors and windows bing closed).
Once you press the [PART ON] key, exit delay begins. Use Part On when you want part of your system turned on. For
example, use Part On if you plan to stay inside the premises and you only want to protect the perimeter doors, or you are
leaving and you want a pet to move freely about inside without causing an alarm.
1.
Make sure that Part points are normal (not faulted). If your system has faulted points, return them to normal,
or bypass them.
2.
Press [PART ON]. The command center may prompt you to enter a valid passcode.
3.
Enter your passcode if necessary. The On indicator turns on and Exit delay time begins. The command center
display scrolls the following:
Enter your passcode to stop the system from turning on during the exit delay. You can turn the system Part On
with No Delay by pressing [NO DELAY]. Or you can bypass points by pressing [BYPASS].
4.
During the last 10 sec. of Exit Delay, the command center displays Do not exit! and emits a double tone
every second to warn you not to exit and to turn the system off. The system turns Part On. The On indicator
remains on steady.
5.
To turn the system off, enter your passcode.
46841D
Smiths Residence
Ok for Part On
60 seconds to
Part On.
To bypass points
Press Bypass.
For no delay
Press No Delay.
For All On
press All On
48 seconds to
Part On.
Smiths Residence
Part On
D623/D625 User Guide
Page 12
© 2003 Bosch Security Systems
Advertisement
Table of Contents
