Sign in today to find solutions:

Don't have an account? Sign up

 
DIVAR IP 2000
DIP-2040-00N, DIP-2042-2HD, DIP-2042-4HD
en
Installation Manual
Next page ->

Summary of Contents

  • Page 1

    DIVAR IP 2000 DIP-2040-00N, DIP-2042-2HD, DIP-2042-4HD Installation Manual...

  • Page 3: Table Of Contents, Table Of Contents

    Chassis setup and maintenance Removing hard drive trays Installing a hard drive System setup - first steps Introduction Setup instruction Starting the application Using Configuration Wizard Recovering the unit Additional Documentation Bosch Sicherheitssysteme GmbH Installation Manual 2013.05 | V1 | DOC...

  • Page 4: Safety Precautions, General Safety Precautions

    Handle used batteries carefully. Do not damage the battery in any way. A damaged battery may release hazardous materials into the environment. Dispose of empty batteries according to the manufacturer's instructions. 2013.05 | V1 | DOC Installation Manual Bosch Sicherheitssysteme GmbH...

  • Page 5: Electrical Safety Precautions

    Installation should only be carried out by qualified customer service personnel in accordance with the applicable electrical regulations. Disposal Your Bosch product has been developed and manufactured using high- quality materials and components that can be reused. This symbol means that electronic and electrical devices that have reached the end of their working life must be disposed of separately from household waste.

  • Page 6: Esd Precautions, Operating Precautions

    Do not discard a used battery in the garbage or a public landfill. Please comply with the regulations set up by your local hazardous waste management agency to dispose of your used battery properly. 2013.05 | V1 | DOC Installation Manual Bosch Sicherheitssysteme GmbH...

  • Page 7: System Overview, Chassis Features, Chassis Components, Chassis, Backplane, Power Supply

    16 channels. All channels are pre-licensed. Running the full Bosch recording solution including the Video Streaming Gateway to integrate 3rd party cameras, DIVAR IP 2000 is an intelligent IP storage device that provides both, a professional video recording solution and ease of operation.

  • Page 8: Device Views

    This chapter explains the meanings of all LED indicators. Front view: Lock for front cover LAN activity LED Power on/off LED System status LED Hard disk access LED Individual hard disk LED 2013.05 | V1 | DOC Installation Manual Bosch Sicherheitssysteme GmbH...

  • Page 9: Led Description - Front Panel

    Blue On (default) Working (S0 state) HDD LED No disk access Blue Blinking Disk access LAN LED Network disconnected Blue Network connected Blue Blinking Network activity System LED Power off Bosch Sicherheitssysteme GmbH Installation Manual 2013.05 | V1 | DOC...

  • Page 10: Lan Port Led Description - Rear Panel

    System has booted in normal operation. Blue Blinking System is booting or shutting down Critical event occurred, such as degraded RAID volume. Bosch also provides the API and then application program is able to control this status. Individual hard Off (default) Hard drive not present.

  • Page 11: Chassis Setup And Maintenance, Removing Hard Drive Trays, Installing A Hard Drive

    Notice! We recommend using the respective Bosch hard disk drives. The hard disk drives as one of the critical component are carefully selected by Bosch based on available failure rates. HDD – not delivered from Bosch – are not supported. Information on supported HDDs can be found in the datasheet in the Bosch Online Product Catalog.

  • Page 12: System Setup - First Steps, Introduction, Setup Instruction, Starting The Application

    To start the application: Connect the unit and the cameras to the network. Turn on the unit. The Microsoft and Bosch EULA (End-user license agreement) is displayed. Accept the EULA, then click Next >. The logon screen for the default user is displayed.

  • Page 13: Using Configuration Wizard

    Click Next > to start the configuration. Notice! If VRM is not available on the computer or the license check fails, a corresponding error message is displayed. You cannot continue working with Configuration Wizard. Bosch Sicherheitssysteme GmbH Installation Manual 2013.05 | V1 | DOC...

  • Page 14

    DIVAR IP 2000 Passwords page This page allows you to specify a password to protect the devices from unauthorized access. Enter the respective password, confirm the password, then click Next >. 2013.05 | V1 | DOC Installation Manual Bosch Sicherheitssysteme GmbH...

  • Page 15

    DIVAR IP 2000 System setup - first steps | en Recorder page This page displays recorder information. Click Next > to continue. Bosch Sicherheitssysteme GmbH Installation Manual 2013.05 | V1 | DOC...

  • Page 16

    DIVAR IP 2000 Device Selection page This page displays all network devices that are added to the system. Clicking Update starts the scan process again. Click Next > to continue. 2013.05 | V1 | DOC Installation Manual Bosch Sicherheitssysteme GmbH...

  • Page 17

    DIVAR IP 2000 System setup - first steps | en Network page This page allows you to configure the network settings of connected devices. Click Next > to continue. Bosch Sicherheitssysteme GmbH Installation Manual 2013.05 | V1 | DOC...

  • Page 18

    DIVAR IP 2000 Date and Time page This page allows you to synchronize the device time with the computer time or a SNTP time server. Click Next > to continue. 2013.05 | V1 | DOC Installation Manual Bosch Sicherheitssysteme GmbH...

  • Page 19

    System setup - first steps | en Video Quality page This page allows you to define the image quality for live-viewing and to set the maximum bandwidth. Click Next > to continue. Bosch Sicherheitssysteme GmbH Installation Manual 2013.05 | V1 | DOC...

  • Page 20

    | System setup - first steps DIVAR IP 2000 Recording page This page allows you to define the recording profiles. Click Next > to continue. 2013.05 | V1 | DOC Installation Manual Bosch Sicherheitssysteme GmbH...

  • Page 21

    DIVAR IP 2000 System setup - first steps | en Summary page This page displays a summary of all wizard settings. Click Apply to activate the configuration. Bosch Sicherheitssysteme GmbH Installation Manual 2013.05 | V1 | DOC...

  • Page 22: Recovering The Unit

    After the restart of the unit, the factory default settings are installed and the Windows logon screen is displayed. The factory default settings are: – IP address: 192.168.178.200 – Subnet mask: 255.0.0.0 – User: Administrator – Password: WSS4Bosch 2013.05 | V1 | DOC Installation Manual Bosch Sicherheitssysteme GmbH...

  • Page 23: Additional Documentation

    Additional Documentation | en Additional Documentation Documentation for Bosch Security System products can be found as follows: www.boschsecurity.com > select your region and your country > select Product Catalog > start a search for your product > select the product in the search results to show the existing documents.

  • Page 26

    Bosch Sicherheitssysteme GmbH Robert-Bosch-Ring 5 85630 Grasbrunn Germany www.boschsecurity.com © Bosch Sicherheitssysteme GmbH, 2013...

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: