Related Manuals for Bosch D623
Summary of Contents for Bosch D623
- Page 1 Security System D623/D625 User Guide National Security Systems (800)457-1999 http://nationalsecuritysystems.com...
- Page 2 EFORE ECURITY YSTEM IS CONNECTED TO TELEPHONE NUMBER ____________________________________ ECURITY ONTROL ANEL IS CONNECTED TO THE PHONE JACK LOCATED ____________________________________ : _________________________________ RANSFORMER OCATION : _______________________________ IRCUIT REAKER UMBER D623/D625 User Guide 46841D Page 2 © 2003 Bosch Security Systems...
-
Page 3: Table Of Contents
View Point Trouble (Cmd 48) ..................................28 System Test (Cmd 41) ...................................... 28 Walk Test (Cmd 44) ......................................29 Reset the System (Cmd 47) ..................................30 Turn Watch On/Off (Cmd 61) ..................................30 D623/D625 User Guide © 2003 Bosch Security Systems Page 3 46841D... - Page 4 Fire Safety and Evacuation .................................... 47 Maintenance and Service ....................................48 Power Failure ........................................48 How to Clean the Command Center ................................. 48 Glossary ........................................... 49 Index ............................................50 D623/D625 User Guide 46841D Page 4 © 2003 Bosch Security Systems...
-
Page 5: About This User Guide
However, you can turn your system on with faulted points by using the Bypass Points command. You can see if there are any faulted points by pressing the [*] key when the system is off. D623/D625 User Guide © 2003 Bosch Security Systems Page 5 46841D... -
Page 6: Are All Points The Same
Check with your security company to learn which points are Part points. Controlled Points are Part On 1 - Dining 2 - Kitchen 3 - Bedroom 4 - Living room D623/D625 User Guide 46841D Page 6 © 2003 Bosch Security Systems... -
Page 7: Command Center Keys
If any watched point is faulted, the command center emits a tone to alert. The tone varies in duration, depending on the selected Watched Tone. (See Select Watch Tone on page 31.) D623/D625 User Guide © 2003 Bosch Security Systems Page 7 46841D... -
Page 8: Command Center Led Descriptions
When a trouble event such as a power failure occurs, your command center emits a trouble tone. The command center displays the System Trouble message. See Check System Troubles on page 26 for more information on determining the nature of the trouble. D623/D625 User Guide 46841D Page 8 © 2003 Bosch Security Systems... -
Page 9: How Your System Reports Alarms
Cmd Press and hold [CMD] to remove the alarm messages from the command center display. See View Alarm Memory on page 27 to see which points caused the alarm. D623/D625 User Guide © 2003 Bosch Security Systems Page 9 46841D... -
Page 10: Keypad Adjust (Cmd 49)
Enter your passcode to turn the system off. Once the system is off and there are no faulted points, the command center displays the idle text (second line) as shown below: Smiths Residence OK for All On D623/D625 User Guide 46841D Page 10 © 2003 Bosch Security Systems... -
Page 11: Turn The System All On (All On Or Cmd 1)
The system turns All On. The On indicator remains on steady. Smiths Residence All On To turn the system off, enter your passcode. D623/D625 User Guide © 2003 Bosch Security Systems Page 11 46841D... -
Page 12: Turn The System Part On (Part On Or Cmd 2)
The system turns Part On. The On indicator remains on steady. Smiths Residence Part On To turn the system off, enter your passcode. D623/D625 User Guide 46841D Page 12 © 2003 Bosch Security Systems... -
Page 13: Turn The System Part 2 On (Cmd 3)
The system turns Part 2 On. The On indicator remains on steady. Smiths Residence Part 2 On Enter your passcode to turn the system off. D623/D625 User Guide © 2003 Bosch Security Systems Page 13 46841D... -
Page 14: Set Part 2 Points (Cmd 65)
During this window, the display scrolls through the following messages: No exit time! System arming. Do not exit! If you decide not to allow the system to arm, enter your user passcode. D623/D625 User Guide 46841D Page 14 © 2003 Bosch Security Systems... - Page 15 Part On On with No Delay The On indicator turns on and blinks, indicating the system is on with no delay. To turn the system off, enter your passcode. D623/D625 User Guide © 2003 Bosch Security Systems Page 15 46841D...
-
Page 16: Turn The System On With No Exit Tone (Delay Silent)
To turn the system on (All On, Part On, or Part 2 On) with no delay, press [NO DELAY]. See Turn the System On with No Delay on page 14 for more information. D623/D625 User Guide 46841D Page 16 © 2003 Bosch Security Systems... -
Page 17: Turn The System On With Points Faulted (Force Arm)
If a point becomes faulted after the exit delay begins, the command center displays the faulted point. If the point remains faulted at the end of exit delay, it starts an alarm event. D623/D625 User Guide © 2003 Bosch Security Systems Page 17 46841D... -
Page 18: View Faulted Points
[1] [0] [*]). Repeat this step to bypass all desired points. If a point is already bypassed, the command center displays: Hallway To unbypass 3 Press 3 + * D623/D625 User Guide 46841D Page 18 © 2003 Bosch Security Systems... -
Page 19: Date And Time (Cmd 45)
In the event of a power cycle (power is lost to the system and then restored), the panel takes the last event in the log and uses that as a starting point for the time and date. It then alerts you to enter the current time and date. IMPORTANT D623/D625 User Guide © 2003 Bosch Security Systems Page 19 46841D... -
Page 20: Change Passcode (Cmd 55)
Enter your new passcode again. As you enter your new passcode, the command center displays: Entering Code The command center displays the following to confirm you have successfully changed your passcode: Code changed The command center returns to the normal display. D623/D625 User Guide 46841D Page 20 © 2003 Bosch Security Systems... -
Page 21: Change Others' Passcodes (Cmd 56)
The command center displays the following to confirm the passcode change. Code 2 changed. 10. Repeat Steps 4 through 9 to change another passcode or press [CMD] to exit this feature. Pressing [CMD] again returns to the normal display. D623/D625 User Guide © 2003 Bosch Security Systems Page 21 46841D... -
Page 22: Change Others' Passcode Authority Levels (Cmd 56)
Enter the new authority level (1 to 4) for the passcode that you want to change. The authority levels are determined by the installing company. Press [CMD] to exit this feature. Press [CMD] again to return to the normal display. D623/D625 User Guide 46841D Page 22 © 2003 Bosch Security Systems... -
Page 23: Add A Passcode (Cmd 56)
The new user passcode, area assignment and authority level automatically logs into the system’s programming memory. Make sure that your security company’s programming records are properly updated. D623/D625 User Guide © 2003 Bosch Security Systems Page 23 46841D... -
Page 24: Delete Passcodes (Cmd 58)
If the user does not exist in the system, the command center emits an error tone. IMPORTANT Press [CMD] to exit this command. If no keys are pressed, the command center automatically returns to the normal display. D623/D625 User Guide 46841D Page 24 © 2003 Bosch Security Systems... -
Page 25: Renew One-Time Passcodes (Cmd 53)
All one-time codes renewed. If you select a single passcode to renew, like Passcode 5, the command center displays: One-Time Code 5 renewed. The system returns to the normal display. D623/D625 User Guide © 2003 Bosch Security Systems Page 25 46841D... -
Page 26: Check System Troubles (Cmd 4)
The trouble tone for AC Failure events sounds at all command centers in all areas. However, the trouble tone must be silenced in each area (silencing it in one area does not silence it in the other areas). IMPORTANT D623/D625 User Guide 46841D Page 26 © 2003 Bosch Security Systems... -
Page 27: View Alarm Memory (Cmd 40)
Call for service If there are no system troubles, the command center displays: There are no system troubles! Press [CMD] to return to the normal display. D623/D625 User Guide © 2003 Bosch Security Systems Page 27 46841D... -
Page 28: View Point Trouble (Cmd 48)
The next component to be tested is the back-up battery. This test may take up to 4 min. Testing Battery May take 4 min. The command center displays the result of the battery test: Battery Test failed! Battery Test Please call for passed. service. D623/D625 User Guide 46841D Page 28 © 2003 Bosch Security Systems... -
Page 29: Walk Test (Cmd 44)
Pt3 Tested OK Hallway To stop testing, press [CMD]. Test fire detection devices (smoke/heat detectors) weekly as instructed by your security company and in accordance with the devices’ instructions. IMPORTANT D623/D625 User Guide © 2003 Bosch Security Systems Page 29 46841D... -
Page 30: Reset The System (Cmd 47)
Enter your passcode if necessary. The command center displays the current Watch status (On or Off). Press [1] to turn Watch On or press [2] to turn Watch Off. Press [CMD] to exit this feature. D623/D625 User Guide 46841D Page 30 © 2003 Bosch Security Systems... -
Page 31: Select Watch Tone (Cmd 62)
The display continues to scroll the remaining points. You may continue to program as many Watch Points as are available. When you are finished, press [CMD] to return exit this command. D623/D625 User Guide © 2003 Bosch Security Systems Page 31 46841D... -
Page 32: Extend Auto On Time (Cmd 51)
For example, if you do not want your sked to operate on Mondays and Wednesdays, first press the [8] key to turn the All Days feature off. Then press the corresponding number keys to clear Monday and Wednesday from the sked. D623/D625 User Guide 46841D Page 32 © 2003 Bosch Security Systems... -
Page 33: All On Skeds
Sk2 A1 1 2 3 4 5 6 7 8 Days - - T W R F S - 10. Press [CMD] when you are done changing the sked. D623/D625 User Guide © 2003 Bosch Security Systems Page 33 46841D... -
Page 34: Part 2 On Skeds
Sk4 A3 1 2 3 4 5 6 7 8 Days - - T W R F S - 10. Press [CMD] when you are done changing the sked. D623/D625 User Guide 46841D Page 34 © 2003 Bosch Security Systems... -
Page 35: Output On Skeds
You now decide that you do not want this sked to activate on Monday. To remove Monday, press [2]. 1 2 3 4 5 6 7 8 Days - - T W R F S - 10. Press [CMD] when you are done changing the sked. D623/D625 User Guide © 2003 Bosch Security Systems Page 35 46841D... -
Page 36: Change Outputs (Cmd 54)
If your system is busy and cannot call your security company’s remote PC computer, the command center displays: System Busy. Try again later. The command center automatically returns to the normal display when programming is complete. D623/D625 User Guide 46841D Page 36 © 2003 Bosch Security Systems... -
Page 37: All Areas Off (Cmd 81)
All Areas All On Exit Now! The command center now displays all areas that have been forced on, one at a time. A-2 Forced On Smiths Residence A-4 Forced On Smiths Residence D623/D625 User Guide © 2003 Bosch Security Systems Page 37 46841D... -
Page 38: Move To Area (Cmd 50)
To delete digit, Press B key. To view and edit press Bypass. To stop edit, Press Bypass. To exit, Hold Cmd. Enter the auto-forward off sequence to redirect all incoming calls. D623/D625 User Guide 46841D Page 38 © 2003 Bosch Security Systems... -
Page 39: Auto-Forward Off Setup (Cmd 84)
Bypass. To stop edit, Press Bypass. To exit, Hold Cmd. Enter the auto-forward off sequence to redirect all incoming calls. Press and hold [CMD] to exit this command. D623/D625 User Guide © 2003 Bosch Security Systems Page 39 46841D... -
Page 40: Auto-Forward On/Off (Cmd 82)
(land line) phone does not produce a tone long enough to arm Area 1, retry by quickly pressing the [5] key three times. Remotely disarming the panel cannot be done with a telephone. IMPORTANT D623/D625 User Guide 46841D Page 40 © 2003 Bosch Security Systems... -
Page 41: View Log (Cmd 85)
Ks## Keyswitch number User number Communication status for Routing Destinations 1 and 2 - (dash) Destination disabled Aborted Deleted from pending buffer by panel reset Faulted Local Pending Sent D623/D625 User Guide © 2003 Bosch Security Systems Page 41 46841D... -
Page 42: Basic Pager Reports
• User ID 253 is reserved for remote telephone communication. • User ID 254 is reserved for remote programming communication. • User ID 255 is reserved for keyswitch operation. D623/D625 User Guide 46841D Page 42 © 2003 Bosch Security Systems... -
Page 43: Panel Event Descriptions
Battery Panel backup battery missing. Very low, Cls, All, System turned All On with no delay Missing shorted, or open batteries reported as -Dly, Usrl (instant) by user. missing. D623/D625 User Guide © 2003 Bosch Security Systems Page 43 46841D... - Page 44 Point Point closed by independent Point Open, Usr Opening by user, by ID reported. Closing Control device. CommFail Report failed to reach routing Open, KS Opening by keyswitch. destination. D623/D625 User Guide 46841D Page 44 © 2003 Bosch Security Systems...
- Page 45 Restoral from alarm, Panic point type. Test, OK No system troubles at automatic test Panic report time. Rstrl, Restoral from alarm, Invisible point Test, Off- System trouble present at test time. Invisible type. normal D623/D625 User Guide © 2003 Bosch Security Systems Page 45 46841D...
- Page 46 Local event only. supervised siren output. Siren Trouble condition on supervised siren Default Installer or User default PINs are Restoral output cleared. PINS Rstl changed. Local event only. D623/D625 User Guide 46841D Page 46 © 2003 Bosch Security Systems...
-
Page 47: Security System Limitations
Note: A smoke detector should be located on each story including basements, but excluding crawl spaces and unfinished attics. Locate smoke detectors between sleeping areas and family living areas. D623/D625 User Guide © 2003 Bosch Security Systems Page 47 46841D... -
Page 48: Maintenance And Service
If your command center gets dirty, apply a household glass cleaner to a clean cloth or paper towel and wipe the surface. Do not spray any liquid directly onto the command center. It could run inside the case and damage electrical circuits. D623/D625 User Guide 46841D Page 48 © 2003 Bosch Security Systems... -
Page 49: Glossary
Warble Tone: Tone that is on for 1 sec., then briefly off. Windows® is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. D623/D625 User Guide © 2003 Bosch Security Systems Page 49 46841D... - Page 50 Security System User Guide Notes: D623/D625 User Guide 46841D Page 50 © 2003 Bosch Security Systems...
-
Page 51: Index
Part On ..................12 Maintenance and Service .............. 48 Walk Test ..................29 Non-fire 24-hour Points ..............6 Watch Points ................. 31 Non-Fire Trouble Events ..............8 Watch Tone ................... 31 D623/D625 User Guide © 2003 Bosch Security Systems Page 51 46841D... - Page 52 © 2003 Bosch Security Systems 46841D 07/03 130 Perinton Parkway, Fairport, NY 14450-9199 USA User Guide D623/D625 Customer Service: (800) 289-0096; Technical Support (888) 886-6189 Page 52 of 52...