Table of Contents
Advertisement
4.
Press and hold [Cmd] to exit this command.
A typical dialing sequence might be:
•
two-digit telephone company feature code (72)
•
pause
•
phone number to forward to (315-555-1212)
•
flash (on-hook, pause, off-hook)
•
terminate (t)
For this sequence, the entry would look like:
7 2 p 3 1 5 5 5 5 1 2 1 2 f t
Auto-Forward Off Setup (Cmd 84)
I can perform this command.
I cannot perform this command.
Use this command to program the auto-forward off sequence that cancels the redirecting of all incoming calls to another
telephone number when you turn the system off.
1.
Press [CMD] [8] [4]. The command center may prompt you to enter a valid passcode.
2.
Enter your passcode if necessary. The command center display scrolls:
3.
Enter the auto-forward off sequence to redirect all incoming calls.
4.
Press and hold [CMD] to exit this command.
© 2003 Bosch Security Systems
Auto-Forward Off
setup mode.
Enter digits for
Auto-Forward Off
For 'pause' (P),
press All On.
For 'flash' (F)
press Part On.
A and C keys
move cursor.
To delete digit,
Press B key.
To view and edit
press Bypass.
To stop edit,
Press Bypass.
To exit,
Hold Cmd.
D623/D625 User Guide
Page 39
Security System
User Guide
46841D
Advertisement
Table of Contents
